Lifting clutch, It is used in the hoisting of PC construction, and is generally used to connect lifting anchor. Lifting clutch composed of three parts, ball head, ring and plate. The corresponding materials are G30CrMoV, Q345D and 20Mn2 respectively. The combined rotation capabilities of the main body and the bail allows a precast panel to be lifted, turned, tilted, and/or rotated while under load. When the head of the lifting clutch inserted into the recess and anchor head, the bolt will lock down the anchor from the head of the lifting clutch. The lifting clutch casting head needs to special head treatment to improve mechanical behavior. Each product is attached with the corresponding tensile and material test report. And one piece of each batch of products can be selected for breaking test according to the demand, and the report shall be provided.
Lifting clutch has the advantages of small volume, high load, convenient and fast construction and so on.
1.3T 2.5T 5T 10T(7.5T) 20T(15T) 32T
Application: It is applied to buildings and matched with appropriate lifting anchor according to the model.
After-Sales: Provide triple tensile test report, fivefold breaking test report and other test reports. Most of the lifting clutch contains alloy steel castings, which are produced and checked according to the normal standard. According to the routine, each product is subject to magnetic particle flaw detection and strict sampling breaking test. The bearing coefficient used by users is also relatively high.
There is no need to worry about the danger in the process of use. As long as you operate according to the normal standard operation steps, and the selected lifting clutch is also appropriate, so there is no problem. Therefore, before using it, the user should still read the operation manual and operate in the correct way to ensure that you will not have problems.
España
Portugal